10 Ghost Immobiliser Problems Tricks All Experts Recommend > 자유게시판

Protect Your Pride And Joy With The Ghost Immobiliser

Ghost Immobiliser can safeguard your prized possession from theft. This system is discrete and doesn't require additional key fobs.

The device uses existing buttons on your vehicle (steering wheel, door panels & centre console) to create a unique, changeable pin code sequence that can be up to 20 presses. This will then authorize the startup of your vehicle.

Simple process to change the PIN code

Many homeowners are upgrading their security due to the rising number of vehicle thefts. There are a variety of security devices that are sold aftermarket including tracking systems, immobilisers and alarms. However, not all of these are equally efficient in protecting your vehicle. A tracking device can help you locate your vehicle in the event of it being stolen however, it won't prevent the crime. An immobiliser, on contrary, does exactly what it says on the tin: it disables the engine of your car to prevent it from being started. The Autowatch Ghost immobiliser is one of the most advanced options on the market, making it virtually impossible for thieves to steal your vehicle.

The ghost device makes use of the buttons on your car to create an unique sequence that needs to be entered to allow the engine to begin. This can be done via the indicator stalk, window or heater buttons. There is also a mobile app that can be used as an emergency PIN override, allowing the driver to operate their vehicle without the need to use the button sequence. This is especially useful when you need to hand your car over for valet parking or servicing, as the immobiliser is activated and not disabled.

The Ghost is a unique and ingenious device that works in conjunction with buttons in your vehicle rather than being a standalone device. This means that it is not just a highly effective protection against theft of your vehicle, but can also be transferred over to any future cars you may own, making it more valuable than traditional steering wheel locks.

Small, weatherproof device

The autowatch ghost 2 installers near me ghost immobiliser is an advanced security system that guards your car from key cloning, hacking and ECU swapping. It is a small weatherproof device that connects with the ECU of your vehicle directly over the CAN bus to disable the motor. It can be installed in the vehicle without any wiring and has been thoroughly tested to ensure compatibility with all vehicles. It also is resistant to jamming devices which are a typical technique used by thieves to get around immobilisers.

The benefit of using CAN data is that it runs silently when compared to conventional systems. It is not able to be detected by sophisticated RF scanning and code-grabbing techniques, nor can it be recognized by conventional diagnostic tools. The Autowatch ghost doesn't produce LED indications and uses the buttons inside your vehicle like the steering wheel, centre console or door panels to create a unique, programmable disarm sequence. The sequence can be extended 20 or more presses for extra security. The iPhone app only allows one connection, and comes with an individual pairing code for the Ghost 2 immobiliser. All communication between the two devices is secured.

The Ghost will stop car thieves from putting in a new ignition key or replacing the ECU to bypass the immobiliser. It will only allow the engine to run only if the correct pin code is entered. It can be temporarily operated in the Valet/Service mode (with parameters set, such as a 30mph speed limit) which means you can hand your car to valet or service without entering the code.

Each vehicle is tested

The Autowatch Ghost is a first-of-its-kind aftermarket CANbus immobiliser. It can be connected to the wiring of your vehicle and to the engine control unit (ECU). The device intercepts signals to prevent your car from operating normally until you enter a customized code. The system can be turned off or on through your smartphone's app without the need for extra wires.

The standard factory immobilisers work with a transponder which is embedded in the key. This sends a message to the ECU. If the correct code is sent the car will begin, but if a transponder is swapped with one from another vehicle the immobiliser cannot recognize it. This makes it possible for the vehicle to be stolen and started. A South African company that is at the forefront of vehicle safety systems technology developed the Ghost immobiliser. It shields you from hacking or key cloning and even key theft. Only by physically towing your vehicle away from thieves could they get it, and they would still not be able to drive the vehicle.

Ghost uses buttons on your vehicle, including the indicator stalk, the steering wheel, and door panels, to generate an individual PIN code which must be entered in order to use your car. This is done without any extra hardware, such as key fobs. It can take up 20 to 20 presses. It is also inaccessible to diagnostics equipment and does not transmit radio frequency signals so thieves cannot utilize sophisticated RF scanning or code grabbing technology to detect that security systems have been installed.

Contrary to physical anti-theft devices such as clamps or wheel locks Ghost is concealed within the vehicle to ensure that it can't be disabled or removed by thieves and is even more difficult to get rid of from a car alarm which requires disarming via the use of a button sequence. This makes it an excellent complement to a GPS tracking device, which can be used to locate your vehicle after it's been stolen.

Emergency PIN code override

You don't need to look too far on social media sites to find stories or even videos of vehicles that were stolen by thieves using the latest technology tools available to them. Key-cloning devices, for instance, and hacking tools that allow them to start the vehicle with the original keys.

Our ghost immobiliser fitter - you could try these out - immobiliser is specifically designed to prevent this and offer an extra layer of security in order to prevent your vehicle from being targeted by thieves. It creates an individual pin code push sequence from your existing buttons on the steering wheel, door panel and the center console. This unique PIN has to be entered in conjunction with your original key fob in order to prevent the vehicle from getting started. The unique override PIN is on the black card you will receive after installation. It's easy to remember since there are no LED indicators.

The device is hidden in the vehicle's wires and does not emit radio signals, which means it isn't able to be detected by modern criminals with diagnostic software that can identify the security system you have installed. This makes it an excellent alternative to the tracking device.

Contrary how to become a ghost immobiliser installer most security systems, which have an engine relay bay, CANBUS Immobilisers communicate with the car's ECU and BCM via the CAN data bus (brand dependent). This enables them to shut down the vehicle completely by sending a digital block of commands to both the ECU and the engine.

These systems can also be linked to a separate analogue alarm immobiliser or tracker. This should be decided prior to the installation. They are also compatible with valet and service modes, and are an excellent alternative to a tracking device if you bring your vehicle to the dealer to address an electrical problem.

Service/Valet mode

In recent times, there has been a increase in vehicles that are stolen without owners' keys. It's more easy than ever to steal your pride & joy thanks to the availability of key cloning tools and door lock picks. To combat this we are now offering the Autowatch Ghost immobiliser that prevents your vehicle from being driven despite the fact that your keys were cloned or your vehicle was stolen.

It directly communicates with your cars ECU (Engine Control Unit) via the CAN data circuit. It's completely silent since it doesn't utilize radio frequencies or key fobs. It can't be detected by diagnostics or any other hacking device. It also stops the user from using an ECU or key to bypass the system since only the PIN code allows the engine to start.

The device is hidden in your vehicle and is accessed by existing buttons on your steering wheel, center console, and door panels. A unique & changeable PIN code sequence up to 20 digits has to be entered before you are able to start your vehicle.

This is the first aftermarket immobiliser CAN bus that has been created that will stop your car being started or driven away in the event that a PIN code hasn't been entered first. If you're driving away with the device armed, an indicator will appear on your dashboard which will flash continuously for around 300m. Entering your PIN code will turn off the anti-hijack. Your vehicle will continue to operate just as normal. If you don't enter your PIN code at this point, the warning will continue to flash and will require a new PIN code for every attempt to start your car.